Metal Ceramic Compound Resistors

---

General Product Information

HVR International GmbH offers a wide range of High Load, Non-Inductive Compound Resistors, manufactured from metal ceramic materials.

Application

Metal Ceramic Compound Resistors are used as heating resistors, discharge resistors or capacitors, artificial antennas, load resistors, final resistors in high frequency technics (up to 100 MHz), impulse generators, attenuators, protective resistors against overvoltages and for non-inductive simulation.

Metal Ceramic Resistors are applicable for installation in transmitting stations, laser technics, high frequency technics, power plants, military purpose etc.

Custom Specific Resistors

We have at our disposal numerous resistor materials and many processing capabilities, which is necessary for the development of special compound resistors.

For further information, please contact us.

Environmental compatability

The resistor material consists of sintered ceramic, which is formed out of natural inorganic raw materials as well as metals with a high chemical and thermal resistance.

During application, it is possible that other materials are deposited in the porosity of the ceramic, which must be taken into consideration when the resistor has reached its end-of-life. If necessary, we can assist in end-of-life disposal of the resistors.

Coated resistors are to be handled like other comparable electronic components.